Windproof LED Solar Road Lighting

Windproof LED Solar Road Lighting
What are the measures for led solar street lights to deal with typhoons and strong winds? The height of the light pole must be selected according to the road width and usage, the wall thickness must be above 3.5mm, the inside and outside are hot-dip galvanized, the thickness of the galvanized layer is above 35μm, the thickness of the flange is above 18mm, and the flange and the light pole must be welded. Reinforcing ribs to ensure the strength of the bottom of the light pole. In the past, due to the unqualified galvanization of the light pole and the lack of welding reinforcement, the bottom of the light pole was seriously corroded, and the phenomenon of the light pole being blown off by the wind often occurred. Therefore, the wall thickness of the light pole, the thickness of galvanizing and whether the reinforcement is welded or not are important signs of whether the light pole is qualified or not, otherwise it cannot be used.

Product Description:

Integrated Solar Led Street Light is a new kind of solar Led Street Light for the road lighting. Its solar panel,LED lamp, Controller, battery are all integrated inside the lamp then it is very easy for the installation. In addition, there is a brightness sensor on the lamp. If the brightness is enough, the solar panel can absorb the solar energy for battery charging, while if the brightness is not enough, the LED lamp will be on automatically and the battery will supply the energy to the lamp for area illumination. What’s more, the lamp can be customized with motion sensor or time control mode. Its brightness standard can be adjusted by movement or time schedule. It has solved the problem of complex installation and expensive transportation compared with traditional solar LED Street Light.Waterproof and replaceable LED modular for easy maintenance.

30W/50W/80W/100W/120W/150W/180W IP65 outdoor adjustable integrated motion sensor all in one Led Solar Light.

Integrated solar LED Street Light cannot work without sunshine charging, please select the suitable product model according to the local sunshine radiation and the annual total radiation.Integrated solar LED street light adopts the long life Lithium battery for storing energy,charging temperature at daytime is between: 0°C~+65°C, when temperature goes lower than 0°C, the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than 0°C. Discharging temperature at night is between: -20°C~+65°C, any ambient beyond will bring damage to the battery. Please confirm your local extreme temperature is suitable for above while selecting the street light.

Battery of the “integrated solar LED street light” can be stored for 6 months long after full charged, and please examine, charge it periodically after long time transportation to prevent damage.

While installed in Northern Hemisphere, please make sure the surface of the solar panel to be facing the South to collect maximum sunshine radiation, while installed in Southern Hemisphere, please make sure the surface of the solar panel to be facing the North to collect maximum sunshine radiation. At the same tie please keep it away from any shadow of house, trees etc.

Keep cleaning the surface of the integrated solar LED street light with normal detergent to get maximum power generation, clean the dust or tree leaves or any grease.